ROSIN Rosin provides the bow hair with friction in order to produce a sound when the bow is pulled across the violin strings. Without rosin, the bow will slide across the string and produce a faint whispery sound (or no sound at all). Rosin is generally shaped in round or oblong shapes. A good rosin will enable the bow to grip the string without sounding too rough or coarse. Although most violinists use a light colored rosin, some prefer a dark color (dark is softer & often more coarse). You may want to try several brands until you find the rosin you like best. Visit our Rosin & Sound page for an explanation of how to use rosin.

FINGERBOARD TAPE To assist beginning violinists, some violin teachers use thin strips of colored tape to mark where students should place their fingers on the violin fingerboard. For pictures and additional fingering assistance, visit our Finger Placement page.

VIOLIN POLISH To clean your violin, all that is generally needed is a dry, lint-free cloth to wipe rosin from your strings after each playing session. Although polish is rarely necessary, there may be times when you need to clean your violin. The following commercial violin polish is formulated for stringed instruments and can be used to clean and polish your violin. It’s important to never use commercial furniture polish and/or water to clean your violin (doing so could damage the varnish and acoustics of the violin). For additional violin care suggestions, visit our Instrument Care page.

PEG COMPOUND Peg compound can be used to help with slipping or sticking pegs (it is also known as Peg Dope or Peg Soap). A light coating of peg compound on the peg can lubricate it while also providing an abrasive substance to help the peg stick. Use sparingly, however, because a residue can build up over time. Before using peg compound, you may want to try the following: If your pegs are slipping on your violin, try pushing the peg in securely while turning the peg to keep it from slipping. If you need a temporary quick fix for slipping or tight pegs, some violin teachers use these tips: for sticking pegs, pull the peg partially out, and rub pencil graphite on the sticking part of the peg. For loose pegs, pull the peg partially out, and rub birthday candle wax on the peg to help it stick (some teachers recommend chalk to help pegs stick, but it's abrasive). If you’re still having problems with your pegs, you may need to take your violin to a violin maker or repair person to replace or reshape the pegs.

MUTES Mutes are devices placed upon the violin bridge to dampen or mute the sound of the violin. Violinists generally use two types of mutes:
     1) Mutes for passages of music which call for a muted sound (composers use these
muted passages for special effects or a contrast of sound).
     2) Practice mutes which significantly reduce the sound of the violin (so violinists can
practice & not bother others nearby).

TUNERS & METRONOMES When tuning a violin, most violinists use a tuning fork to tune the open A string, then tune the rest of their strings by ear. Many beginning violinists find it easiest to tune using a digital tuner. Reference pitches are used to tune each open string. Some tuners also use pitch recognition to help the violinist tune their instrument (a needle moves until the note being tuned matches the reference pitch). Visit our Tuning Page for additional tuning suggestions. As the various products below indicate, some tuners also include metronomes (hybrid products). A metronome can be useful when practicing to help maintain a consistent, steady rhythm, as well as experiment with new tempos.

HUMIDIFIERS Violinists often monitor the humidity in their case and/or room with a hygrometer, and if needed, use a humidifier (excessive dryness or too much moisture can damage musical instruments).